Clean finishing a round neckline with a facing creates a more elevated, tailored look. Facings are a great addition to styles constructed of medium to heavy weight fabrics that are difficult to finish with top-stitched binding. Facings are usually considered a higher quality addition used for styles that are less casual. If you are in the process of learning how to sew, attaching a facing to a round neckline is one of the first sewing techniques you should learn. Once you understand the process needed to achieve a smooth, clean-finished neckline you can apply the same steps to attach armhole, sleeve cuff and center front facings. Applying a facing will also teach you techniques like clipping the seam allowance for tension release, stay-stitching and under-stitching, which are equally important in the sewing process.
You can learn how to draft a round neckline facing pattern from scratch using your garment's sewing pattern. Learn the step by step process on last week's blog: How To Make A Sewing Pattern For a Round Neckline Facing.
Cutting Out The Neckline Facing Patterns
In this tutorial, our sewing patterns are drafted to be cut on fold.
1. Fold the fabric parallel to the selvage edge so that the face of the fabric is on the inside of the fold. When cutting on fold, you should always pin and cut your patterns on the wrong side of the fabric.
2. Align the cut-on-fold line of your Front sewing pattern (Center Front) to the fabric's fold. Pin the pattern in place at the seam allowance through both layers of the fabric.
Here's a quick reminder on how to correctly pin and cut a sewing pattern.
3. Repeat this step with the back facing, aligning the Center Back fold line to the fabric's fold and pinning through both layers of the fabric.
4. Cut out the facings carefully around all curved edges.
The facing's edge should be a smooth curved line and cut precisely to the sewing pattern.
5. Remove the pins and unfold the facings. You will notice that for a classic round neckline, the front facing is always more curved than the back. Understanding this will help you correctly position the facing to the raw edge of the neckline.
Sewing The Neck Facing
6. Pin shoulder edges of the front and back facings together so that the face of both fabric layers are touching (the wrong side of the fabric should be on the outside).
For more stability and easy removal during sewing, apply the pins perpendicular to the seam.
7. Machine stitch both shoulder seams at the correct seam allowance (our seam allowance is 1/2"). Don't forget to back-stitch on your sewing machine at the beginning and end of the stitch.
8. Iron the seam allowance open on the inside of the facing.
9. Once the facing's shoulder seams are connected and ironed, apply a finishing method to the bottom raw edge of the facing. Depending on the fabric you are working with, the most common techniques for clean finishing a facing's raw edge is by serging, with a baby hem (for lightweight fabrics), binding, or machine stitching.
You may also use a zig-zag stitch on your home sewing machine but make sure your machine is set at the correct tension balance for the fabric being used.
We clean finished our facing's raw edge with a serging stitch along the bottom.
Do not clean finish the inner circle of the pattern- this edge will be sewn to the neckline's raw edge and does not require serging or any other finishing technique.
10. Pin the facing's raw edge to the neckline's edge starting at the shoulder seams. Match the shoulder seams of the garment perfectly to the facing's shoulder seams and place a pin through both seams. Make sure the right sides of the fabric are touching.
The shoulder seams should be matching perfectly.
11. Once you've stabilized the shoulder seams, apply pins perpendicularly along the rest of the neckline's raw edge.
12. Machine stitch along the neckline's edge at the correct seam allowance (1/2" in our tutorial). This will take some practice along the more curved edge of the neckline. How smooth this stitch line is will ultimately determine the final shape of the neckline so take your time when applying this stitch.
The final result should be a smooth, curved stitch maintaining the correct seam allowance throughout.
13. Clip the seam allowance with your scissors at the more curved areas using a wedge clip to release tension along the more curved areas of the neckline. Be careful not to cut through the actual stitch- the snip should be placed at about 1 mm away from the stitch.
For added tension release add a few notch clips along the back neckline and between the already clipped wedges where needed. Be careful not to over clip the fabric- this could weaken the seam and create a less-durable, unstable edge.
14. Iron the facing's seam pointing away from the garment as shown bellow. This step will prepare the facing for stay-stitching, which is a necessary step in ensuring that the facing lays flat on the inside of the garment and the neckline's edges are consistently smooth throughout.
The seam allowance should be pointing towards the facing.
15. Stitch on top of the facing though the seam allowance on the back, at about 1/8" away from the seam. This is called under-stitching which ensure that the facing lays flat pointing towards the inside of the garment. It will take some time to get a perfectly even under-stitch if you are a sewing beginner but remember that practice makes perfect. The more even the under-stitch is the smoother the edge of the neckline will be.
16. Move the facing to the inside of the garment and iron the neckline's edge.
17. As a final step, it is necessary that you tack the facing at the seams on the inside of the garment. This means applying a loop stitch through the facing and garment's seam allowance to stabilize the facing ensuring that it stays on the inside of the garment permanently.
Match the facing's seams to the garment's seams on the inside and place a pin through to stabilize.
Keeping the pin inserted, hand stitch in place a few times attaching the facing to the garment's seam allowance.
Repeat this step on both sides of the seam allowance as shown bellow and don't forget to remove the pin once done.
Use the tacking method described above on all the garment's seams. This will result in a stable, flat facing that wont flip to the outside with wash and wear.
A journey into our design process, sewing tutorials, small business tips, exciting events and all the things we love.